google-site-verification: googlee39f8dfc2f353b10.html Suspension | Arundel | M1 tyres & Service





"very professional from start to finish, Great service"-Sam

Call us: 07 55 005603

Suspension Gold Coast

Suspension plays a critical part in the control of your vehicle.


Poor suspension can affect braking distances, uneven tyre wear, create knocking noises whilst driving and greatly change the comfort of the ride. 


Common suspension repairs completed by our fully qualified mechanics are:


  • Control arms and bushes

  • Rear Shackle Bushes

  • Shock absorber replacements

  • Shock absorber upgrades

  • Suspension bushes

  • Suspension lifts 


To make your 4WD stand out from the rest is to individualise the setup for your driving needs.


If you drive your 4WD to and from work but enjoy weekends and holidays doing light 4WD tracks then a comfort setup may be more ideal for you.


In the circumstance where you take your 4WDing to another level there are other options available to you. It may not be as comfortable to drive to and from work but it can certainly be set up to tackle the obstacles that you put in your way.


To work out what type of set up that you would require or the products that you would like to use, give us a call today to discuss it further.


Product information:




Oz Tec Suspension is an Australian owned brand that caters the following needs of 4WDers.


COMFORT – this range is suited for a driver that enjoys a smoother ride and the vehicle is slightly loaded vehicle with minimal accessories.


CARGO – this range is especially designed for heavier weights such as long-range fuel tanks, roof racks, bull bars and winches.


Even though the brand is Australian the products are made in Germany to ensure the products meet the high quality set by other brands in the market. 





Bilstein is a leader in the world of Shock Absorbers due to the company’s focus on design and innovation in the industry. The German company supplies shock absorbers to some of the world’s top car manufacturers such as Porsche and Ferrari. 


The time taken with the R & D of the shock absorbers has given the products a variety of applications that range from street, race, drifting through to 4WDing. 


Bilstein B6 Offroad range offers serious 4WD adventurers the best in performance from their shocks absorbers. With over 50 years of development the Bilstein B6 Offroad Shock Absorber gives your vehicles enhanced lane change stability both on the highway as well extreme 4WDing situations.


The Bilstein Gas Pressure Technology is the key to the quality of the product and has been road and track tested by Bilstein.


With a 46mm Piston you can rely on the shock absorber to improve your vehicle control, traction and load carrying capacity. This keeps you and your family safer while enjoying your vehicle.






Front and rear standard springs raises the vehicle approximately 10mm-20mm above the standard 


Front and rear raised springs raises the vehicle approximately 30mm-40mm above standard.



Our workshop completes suspension repairs and lift kits including Modification plates/Certificates for all 4WD vehicles. 


If you are looking to buy a vehicle with 4WDing and installing a lift kit in mind see our suggestions below of makes and models that are popular to have lift kits installed.



Jeep Wrangler

Jeep Cherokee

Jeep Patriot

Jeep Compass

Ford Ranger

Ford Maverick

Holden Rodeo

Landrover Discovery

Mazda Bt50

Mazda Tribute

Mitsubishi Challenger

Mitsubishi Outlander

Mitsubishi ASX

Mitsubishi Triton

Mitsubishi Pajero

Nissan Patrol

Nissan Navara

Nissan Xtrail

Nissan Pathfinder

Nissan Terrano

Range Rover

Toyota Landcruiser

Toyota Hilux

Toyota Prado

Toyota Surf

Volkswagon Amarok


And many more…




Legal Modification Facts


High Lift Modification Code LS9 and LS10 from the Queensland Code of Practice covers the code for the installation of body lift kits from 50mm to 125mm above the height that the vehicle comes standard with from the manufacturer.


Within the legislation of this code it states that a vehicle can be lifted up to 75mm without a modification plate.


Any modifications over 75mm up to 125mm will require testing and assessment for a modification plate to be issued.


These include checking that the vehicle complies with the code guidelines as well as a lane change test. 


To view the guidelines in details click on the link below:


When you are on the page there is a link under the header Queensland Code of Practice Modifications. 


Click on the link Queensland Code of Practice (PDF, 558 KB)


Once in the document you will need to scroll through to pages 41 to 58.




When you are issued your Modification Plate there is a Certificate that you will be given by the examiner. You must keep this in the vehicle to present to authorities such as Queensland Transport and Police if you are pulled over. The Modification Plate alone is not compliant when they inspect the vehicle for the plate, the Certificate must be in the vehicle at all times.

For all enquires and bookings for your suspension needs -

Call Now 07 5500 5603.

© 2018  M1 Tyres & Service

Follow us:

We accept:

Our Location

Visit our store at 2/21-23 Ereton drive Arundel

  • White Facebook Icon
  • White Instagram Icon
  • White Google+ Icon